XPA 2003C

Three Channel Combo Amplifier - 200 Watts Per Channel
Key Features
  • 600 watts rms output power:
    XPA 2003C-70V - 2 x 200 watts @ 4 ohms or 2 x 100 watts @ 8 ohms, and 1 x 200 watts @ 70 volts
    XPA 2003C-100V - 2 x 200 watts @ 4 ohms or 2 x 100 watts @ 8 ohms, and 1 x 200 watts @ 100 volts
  • ENERGY STAR® qualified amplifier
  • Professional grade signal-to-noise and THD+N performance
  • Extron Patented CDRS™ - Class D Ripple Suppression
  • Convection cooled, fanless operation
  • Ultra low inrush current - no need for power sequencing
The Extron XPA 2003C
Model Version Description Part #
XPA 2003C-70V 70 V Three Channel Amp - 200 Watts/Ch 60-848-01
XPA 2003C-100V 100 V Three Channel Amp - 200 Watts/Ch 60-848-11

The Extron XTRA™ Series XPA 2003C is a 1U, convection-cooled, three channel power amplifier delivering two channels of 200 watts into 4 ohms, plus 200 watts at 70 volts or 100 volts. This professional grade amplifier features a 100 dB signal-to-noise ratio with 0.1% THD+N. The XPA 2003C is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. This unique amplifier conserves rack space and weighs only 9 lbs (4 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.

Energy Efficient Amplifier with Auto Power-Down

The XPA 2003C ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 18 watts when idle and less than 1 watt in standby mode.

The XPA 2003C three channel amplifier delivers two channels of 200 watts rms into 4 ohms or 100 watts rms into 8 ohms for amplification of voice or program audio content to stereo speakers. It delivers a third channel with 200 watts rms into a 70 volt or 100 volt line for high impedance speaker systems in voice reinforcement and distributed audio applications.

Professional Integration Features

The XPA 2003C has an ultra low inrush current draw to prevent power circuit overload that occurs when multiple amplifiers are switched on simultaneously. This feature eliminates the need for power sequencing in systems with multiple amplifiers in large centralized equipment racks, and prevents other equipment from experiencing power interruption from associated power surges. The amplifier also features a very low thermal dissipation of 45 watts or 153 BTU/hr, with a full 4 ohm plus high impedance load, to keep racks and equipment cabinets cool.

The XPA 2003C is housed in a compact 1U, full rack width enclosure. It accepts balanced and unbalanced input signals and includes recessed, detented level controls located on the rear panel to prevent tampering. These controls allow for adjusting audio system gain structure, or setting individual levels for each zone. Additionally, the XPA 2003C includes multiple protection circuits that momentarily activate when an abnormal condition, such as overheating, is detected. An advanced, automatic clip limiter protects speakers from clipping distortion.

Features

OPTIONAL ACCESSORIES
  PPC 25 Priority Page Controller
  SPK 14 14 AWG Speaker Cable
  SPK 16 16 AWG Speaker Cable
  SPK 18 18 AWG Speaker Cable
RELATED SPEAKERS
  SF 26CT SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
  SF 3C LP SoundField XD 3" Full-Range 8 Ohm Ceiling Speakers with 4" Low Profile Composite Back Can
  SF 3CT LP SoundField XD 3" Full-Range Ceiling Speakers with 4" Low Profile Composite Back Can and 70/100 V Transformer
  SF 3PT SoundField 3" Full-Range Pendant Speaker
  SF 26PT SoundField 6.5" Two-Way Pendant Speaker
  FF 120T Full-Range Flat Field Speakers with 1' x 2' Low Profile Enclosure and 70/100 V Transformer
  FF 220T Full-Range Flat Field Speakers with Low Profile Enclosure and 70/100 V Transformer
  CS 123T Full-Range 70/100 V SpeedMount Ceiling Speaker System
  CS 3T Full-Range Open Back Ceiling Speakers with 70/100 V Transformer
  CS 1226T Plus Two-Way 70/100 V SpeedMount Ceiling Speaker System
  CS 26T Plus Two-Way Open Back Ceiling Speakers with 70/100 V Transformer
  SF 228T Two-Way SoundField Ceiling Tile Speakers with 8" Woofer and 70/100 V Transformer
  SM 3 SpeedMount Compact Full-Range Surface Mount Speakers
  SM 26 SpeedMount Two-Way Surface Mount Speakers with 6.5" Woofer
  SM 28 SpeedMount Two-Way Surface Mount Speakers with 8" Woofer
RELATED PRODUCTS
  XPA U 758 Eight Channel Low Impedance Amplifier
75 Watts Per Channel
  XPA U 358 Eight Channel Low and High Impedance Amplifiers
35 Watts Per Channel
  XPA U 358C Eight Channel Combo Amplifier
35 Watts Per Channel
  XPA U 1004 Four Channel Low and High Impedance Amplifiers
100 Watts Per Channel
  XPA U 1004C Four Channel Combo Amplifier
100 Watts Per Channel
  XPA U 1002 Two Channel Low and High Impedance Amplifiers
100 Watts Per Channel
  MPA 152 Plus Stereo Amplifier - 15 Watts Per Channel
  MPA 601 Mono 70/100 V Amplifier - 60 Watts

Specifications

XPA 2003C-70V, XPA 2003C-100V
Audio
   Voltage gain 
      Channels 1 and 2 23x (27 dB)
      Channel 3 
         XPA 2003C-70V 57x (35 dB)
         XPA 2003C-100V 81x (38 dB)
   Crosstalk 75 dB (typical) @ 1 kHz
   CMRR 75 dB (typical) @ 1 kHz
Audio input
   Number/signal type 3 balanced/unbalanced
   Connectors (3) 3.5 mm captive screw connectors, 3 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level +4 dBu (1.23 Vrms), balanced
   Maximum level +21 dBu (8.69 Vrms), balanced
   Input sensitivity +4 dBu (1.23 Vrms)
   Input signal detection threshold -40 dBu ±3 dB, balanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 
      XPA 2003C-70V 2 channels, 4 or 8 ohms
1 channel, 70 V
      XPA 2003C-100V 2 channels, 4 or 8 ohms
1 channel, 100 V
   Connectors (1) 5 mm screw lock captive screw connector, 4 pole
(1) 5 mm screw lock captive screw connector, 2 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
   Load impedance 
      Channel 1 or 2 4 ohms minimum
      Channel 3 
         XPA 2003C-70V 25 ohms minimum
         XPA 2003C-100V 50 ohms minimum
   Amplifier type Class D
   Output power 
      Channel 1 or 2 (8 ohm) 100 watts rms per channel, 1 kHz, 0.1% THD
      Channel 1 or 2 (4 ohm) 200 watts rms per channel, 1 kHz, 0.1% THD
      Channel 3 
         XPA 2003C-70V (70 V output) 200 watts rms per channel, 70 V, 1 kHz, 0.1% THD
         XPA 2003C-100V (100 V output) 200 watts rms per channel, 100 V, 1 kHz, 0.1% THD
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 
      Channel 1 or 2 0.1% @ 20 Hz to 20 kHz, 8 ohms, 3 dB below clipping
      Channel 3 0.1%, 1 kHz, 3 dB below clipping
   S/N 100 dB, 20 Hz - 20 kHz, unweighted
   Damping factor 
      Channel 1 or 2 >100 @ 8 ohms
      Channel 3 
         XPA 2003C-70V >100 @ 25 ohms
         XPA 2003C-100V >100 @ 50 ohms
   High pass filter 
      XPA 2003C-70V 80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
      XPA 2003C-100V 80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable)
Control/remote — amplifier
   Control port (1) 3.5 mm captive screw connector, 2 pole
   Pin configurations 
      Standby power control (contact closure) Pin 1 = GND, pin 2 = standby
General
   Power Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption and thermal dissipation
      XPA 2003C-70V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
Ch 1 & 2 (8Ω) + Ch 3 (70 V) 0.8 92.2 42.2 144 0.5 92.9 42.9 146
Ch 1 & 2 (4Ω) + Ch 3 (70 V) 1.1 122.4 47.4 162 0.6 122.4 47.4 162
Quiescent (idle) 0.3 28.9 28.9 99 0.2 29.8 29.8 102
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

      XPA 2003C-100V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
Ch 1 & 2 (8Ω) + Ch 3 (100 V) 0.8 94.4 44.4 152 0.46 95.3 45.3 155
Ch 1 & 2 (4Ω) + Ch 3 (100 V) 1.1 123.1 48.1 164 0.58 123.3 48.3 165
Quiescent (idle) 0.3 28.1 28.1 96 0.17 28.6 28.6 98
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents, with heat sinks on the sides
   Protection Clip limiting, thermal, short circuit, DC output
   Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
   Mounting 
      Rack mount Yes, with included mounting brackets
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W* x 30.5 cm D)
*Width excludes rack ears. 19.0" (48.3 cm) W with rack ears.
   Product weight 9.2 lbs (4.2kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety BSMI, CCC, CE, c-UL, GS, KC, PSE, S-Mark, UL
Meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
      EMI/EMC CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, VCCI Class B
      Environmental Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(081717-D17)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-848-01 7.0" (17.8 cm) 18.0" (45.7 cm) 23.0" (58.4 cm) 12.6 lbs (5.72 kg)
    60-848-11 7.0" (17.8 cm) 18.0" (45.7 cm) 23.0" (58.4 cm) 11.1 lbs (5.03 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.