| RGB 560 AKM |
|
| Video |
|---|
| Gain | Unity (0.70 Vp-p), (0.725 Vp-p) 50% peaking, (0.75 Vp-p) 100% peaking |
| Bandwidth | 300 MHz (-3 dB) |
|
| Video input |
|---|
| Number/signal type | 1 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs |
| Connectors | 1 female 15-pin HD |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance | 75 ohms or High Z, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency | Autoscan 15 kHz to 130 kHz |
| Vertical frequency | Autoscan 30 Hz to 120 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 4.0 V |
|
| Video output |
|---|
| Number/signal type | 1 analog RGBHV, RGBS, RGsB |
| Connectors | 5 female BNC
1 female 15-pin HD for buffered local monitor output |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0.70 V to 0.75 Vp-p with no offset and 0.7 Vp-p input |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
|
| Sync |
|---|
| Input type | RGBHV TTL (±), RGBS TTL (-), RGsB 0.3V (-), RsGsBs 1.3V (-) |
| Output type | RGBHV (±), RGBS(-), RGsB (-) |
| Input level | 2 V to 5.5 Vp-p with ±0.3 VDC offset (max.) |
| Output level | 4 V to 5 Vp-p, unterminated |
| Input impedance | 10k ohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.7 Vp-p |
| Max. propagation delay | 48 nS |
| Max. rise/fall time | 3.5 nS |
| Polarity | RGBHV: Polarity follows input when RGBHV is input and the sync polarity switch is set to Off. Sync polarity is negative if the sync polarity switch is set to On. |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output |
| S/N | >90 dB at maximum output (14 dBm), balanced (unweighted) |
| Stereo channel separation | >95 dB @ 1 kHz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 1 PC level stereo, unbalanced |
| Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) |
| Impedance | 10k ohms, DC coupled |
| Nominal level | -10 dBV (316 mV) |
| Maximum level | +8.5 dBu, (unbalanced) at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (600 ohm) | >+14 dBm, balanced at 1% THD+N |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 to 24 VAC or VDC, 0.20 A power supply, regulated |
| Power input requirements | 12 VDC, 0.20 A (minimum) |
| NOTE | The power supply must be ordered separately. |
|
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, unvented |
| Mounting | |
| Floor box mount | Yes, in Ackermann floor box systems |
| Enclosure type | Metal |
| Enclosure dimensions | |
| Interface | 3.0" H x 8.2" W x 1.5" D
(7.62 cm H x 20.8 cm W x 3.8 cm D)
(Depth excludes connectors and knobs.) |
| Product weight | 0.9 lbs (0.4 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, UL |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.6-082409-D4) |