| Specifications — RGB 400 Series Interfaces |
|---|
| These specifications apply to all models unless otherwise noted. | |
| Video input |
|---|
| Number/type | 1: analog RGBHV, RGBS, RGsB |
| Connectors | 1: 9-pin male D connector for MBC/LBC cable or buffer |
| Nominal level(s) | Analog: 0.3V to 1.45V p-p |
| Impedance | 75 ohms or HI Z,: switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency | 15 kHz to 150 kHz (optimum 15 kHz to 62 kHz) |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | -30dB @ 5 MHz |
| Video throughput |
|---|
| Gain | Unity (0.7V), 15% with 3dB peaking (0.8V), 30% with 6dB peaking (0.9V) |
| Bandwidth | 300 MHz (-3dB) |
| Video output |
|---|
| Number/type/format | 1 analog RGBHV, RGBS, RGsB |
| Connectors | 6 BNC female |
| Nominal level | Analog: 0.7V p-p, 0.8V p-p, or 0.9V p-p (internal jumper-selectable) |
| w/peaking |
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| Sync |
|---|
| Input type | Autodetect: RGBHV, RGBS, RGsB (accepts RGsB but does not strip from video) |
| Output type | RGBHV: at all times |
| RGBS | at all times |
| RGsB | only when input is RGsB |
| Input level | 2.0V to 5.5V p-p with |
| +0.2VDC offset max. |
| Output level | 4.0V to 5.0V p-p |
| Input impedance | 10 kohms |
| Output impedance | 75 ohms |
| Max propagation delay | 50 nS |
| Max rise/fall time | 2.5 nS |
| Polarity | Positive or negative |
| Audio input — RGB 404 |
|---|
| Number/type | 2 stereo, unbalanced;: 1.0Vrms (+4dBu), 20 Hz to 20 kHz |
| Connectors | Ch. 1: 2 RCA female jacks |
| Ch. 2 | 3.5 mm stereo female jack |
| (2 channel), unbalanced;: |
| tip (L), ring (R), |
| sleeve (ground) |
| Impedance | 10 kohms, DC coupled |
| Minimum level | 100mV |
| Maximum level | +8.5dBu |
| Audio input — RGB 406 and RGB 408 |
|---|
| Number/type | 1 stereo, unbalanced;: 1.0Vrms (+4dBu), 20 Hz to 20 kHz |
| Connectors | 3.5 mm stereo female jack (2 channel), unbalanced; |
| tip (L), ring (R), sleeve (ground) |
| Impedance | 10 kohms, DC coupled |
| Minimum level | 100mV |
| Maximum level | +8.5dBu |
| | |
| Audio throughput — RGB 404 (channels 1 and 2), RGB 406 and RGB 408 |
|---|
| Gain | Unbalanced 0dB, balanced +6dB |
| Response | ±0.5dB @ 20 Hz to 20 kHz |
| THD + Noise | 0.03% @1 kHz, 0.3% @ 20 kHz at rated maximum output drive |
| S/N | >90dB, output 14dBu, balanced |
| Stereo channel separation | >95dB @ 1 kHz to 20 kHz |
| Audio output — RGB 404 (channels 1 and 2) |
|---|
| Number/type | 2 buffered, stereo (2 channel), balanced/unbalanced |
| Connectors | 3.5 mm captive screw terminal, 5 conductor |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Drive (600 ohm) | +14dBu, balanced at stated %THD+N |
| Audio output — RGB 406 and RGB 408 |
|---|
| Number/type | 1 buffered, stereo (2 channel), balanced/unbalanced |
| Connectors | 3.5 mm captive screw terminal, 5 conductor |
| Impedance | 50 ohms, unbalanced, 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Drive (600 ohm) | +14dBu, balanced at stated %THD+N |
| General |
|---|
| Power | 12 to 24VAC or VDC, 0.25 A, 5 Watts, external: (Order the power |
| supply separately.) |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non condensing |
| Rack mount | No, but wall or furniture mountable |
| Enclosure type | Metal |
| Enclosure dimensions (RGB RGB 404) |
|---|
| Plate | 4.50" H x 6.40" W |
| (11.43 cm H x 16.26 cm W) |
| Box | 3.75" H x 5.3" W x 2.5" D |
| (9.5 cm H x 14.2 cm W x 6.35 cm D): 3-gang |
| Interface | 2.8" H x 5.3" W x 2.5" D |
| (7.1 cm H x 13.5 cm W x 6.4 cm D): (depth is given with an HR cable attached) |
| Enclosure dimensions (RGB 406) |
|---|
| Plate | 4.50" H x 4.60" W: (11.43 cm H x 11.68 cm W) |
| Box | 3.75" H x 3.75" W x 2.5" D |
| (9.5 cm H x 9.5 cm W x 6.35 cm D): 2-gang |
| Interface | 2.8" H x 3.5" W x 2.5" D |
| (7.1 cm H x 8.9 cm W x 6.4 cm D): |
| (depth is given for the circuit board with an HR cable attached) |
| Enclosure dimensions (RGB 408) |
|---|
| Plate | 4.50" H x 8.33" W |
| (11.43 cm H x 21.15 cm W) |
| Box | 3.75" H x 7.38" W x 2.50" D |
| (9.50 cm H x 18.73 cm W x 6.35 cm D): |
| 4-gang |
| Interface | 2.8" H x 3.5" W x 2.5" D |
| (7.1 cm H x 8.9 cm W x 6.4 cm D): |
| (depth is given for the circuit board with an HR cable attached) |
| Shipping weight (all models) | 3 lbs: (1.4 kg) |
| Vibration | NSTA 1A in carton (National Safe Transit Association) |
| Approvals | UL, CE, FCC Class A |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |