| Video — faceplates A, D, and G only |
|---|
| Gain | Unity |
| Bandwidth | 400 MHz (-3dB) |
| Video input and loop-through — faceplates A, D, and G only |
|---|
| Number/signal type | 1 VGA_UXGA, |
| Mac®, Sun®, |
| SGI™ analog RGBHV, RGsB input |
| 1 VGA_UXGA RGB local monitor loop-through |
| Connectors | 2 female 15-pin HD (1 for input, 1 for loop-through) |
| Nominal level | 0.7V p-p for RGB |
| Minimum/maximum levels | Analog: 0.6V to 0.7V p-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 30 kHz to 130 kHz |
| Vertical frequency | 30 Hz to 120 Hz |
| Return loss | <-34.0dB @ 5 MHz |
| Video output — faceplates A, D, and G only |
|---|
| Number/signal type | 1 analog RGBHV, RGsB (if RGsB is input) |
| Connectors | 5 BNC female |
| Nominal level | 0.7V p-p for RGB |
| Minimum/maximum levels | Analog: 0.3V to 1.5V p-p |
| Impedance | 75 ohms |
| Return loss | <-49.4dB @ 5 MHz |
| DC offset | ±1.9mV maximum with input at 0 offset |
| Sync — faceplates A, D, and G only |
|---|
| Input type | RGBHV, RGsB |
| Output type | RGBHV, RGsB (if RGsB is input) |
| Input level | 2.4V to 3.7V p-p |
| Output level | 4.4V p-p, unterminated |
| Input impedance | 75 ohms |
| Output impedance | 75 ohms |
| Max. propagation delay | 440 ns |
| Max. rise/fall time | 40 ns |
| Polarity | Negative |
| Audio — faceplates A, D, and G only |
|---|
| Gain | Unbalanced output: +6dB; balanced output: +12dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB |
| THD + Noise | 0.49% @ 1 kHz at 1Vrms |
| S/N | >70dB at rated maximum output |
| Stereo channel separation | >-56dB @ 1 kHz to 20 kHz |
| CMRR | >-95.0dBr @ 20 Hz to 20 kHz, 1Vrms |
| Audio input — faceplates A, D, and G only |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connectors | 1 female 3.5 mm mini stereo jack |
| Impedance | >10 kohms unbalanced, DC coupled |
| Nominal level | -10dBV (316mV) |
| Maximum level | +11.5dBu, (unbalanced) at 0.17%THD+N |
| Audio output — faceplates A, D, and G only |
|---|
| Number/signal type | 2 stereo, balanced/unbalanced |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 57 ohms balanced |
| |
|---|
| Gain error: ±0.06dB channel to channel |
| Maximum level (Hi-Z) | >+24dBu, balanced or unbalanced at 0.17%THD+N |
| Maximum level (600 ohm) | >+24.5dBm, balanced or unbalanced at 0.17%THD+N |
| | 0dBu = 0.775 volts (RMS). |
| Control/remote — lift motor |
|---|
| Contact closure | (1) 3.5 mm captive screw connector, 4-pole |
| Contact closure pin configurations | 1 = +5V, 2 = GND, 3 and 4 = |
| status feedback |
| General |
|---|
| Power | 90VAC to 260VAC, 47 to 63 Hz, TBD watts, |
| internal, autoswitchable |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to |
| 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to |
| 90%, non-condensing |
| Rack mount | No, but furniture mountable |
| Enclosure type | Metal |
| Enclosure dimensions | |
| | Use the appropriate metal Extron routing template or refer to |
| the surface cutout dimensions in the manual before cutting a hole |
| in the furniture or other surface.: Pay special attention to |
| the direction the unit will face.: Extron is not responsible for |
| miscut mounting holes. |
| Product weight | 15 lbs (6.8 kg) |
| Shipping weight | 20 lbs (10 kg) |
| DIM weight | TBD |
| Vibration | ISTA/NSTA 1A in carton (International Safe |
| Transit Association) |
| Listings | ETL (UL1950) |
| Compliances | CE |
| MTBF | 30,000 hours (interface) |
| Maximum motor load | 30 lbs (13.6 kg); exceeding 10 lbs (4.5 kg) |
| will shorten the motor life |
| Warranty | 3 years parts and labor |
| | Specifications are subject to change without notice. |